How do I get SLURRYTUB?

Purchase SLURRYTUB online or find a distributor near you. Shop Online Shop Local

How is SLURRYTUB shipped?

SLURRYTUB is shipped via Purolator Ground within Canada and the U.S. For more information, please contact us. Please note shipping to the Yukon, Nunavut, or Northwest Territories, is not available through our online store. For order inquiries, please contact us.

What types of cleanup can be done in a SLURRYTUB?

SLURRYTUB is designed for cement/concrete, mortar mix and tile grout washout. It is not recommended for some tile adhesives/glues and floor-levelling compounds.

What is the water capacity of the SLURRYTUB?

The SLURRYTUB can hold up to 35 - 40L of wet trade waste material - enough for your standard wheelbarrow washout. However, if greater capacity is needed on your job site, we recommend having another tub ready to go!

How long does it take for the slurry contents to dry and how do I dispose of the hardened waste?

It typically takes 30-60 minutes for the wet slurry to dry, however, this will vary depending on the contents of the washout material. Once the waste has hardened, simply empty the contents and the biodegradable filter into the garbage or take the contents off-site and dispose of them safely following your local municipal guidelines.

How do I attach the SLURRYTUB filter to the tub?

Carefully remove the filter from the ZIPLOCK bag and open the filter, keeping the flap with the logo at the front of the tub. Once the filter is placed into the tub, carefully attach the filter holes to the ‘cleats’ on each corner of the SLURRYTUB. Make sure the filter flap is at the front and sits over the lower cut-out area on the tub.

Can I stand up my wheelbarrow in the SLURRYTUB without holding it?

The cut-out at the front of your SLURRYTUB is specifically tested and designed to support the most commonly available wheelbarrows. Your wheelbarrow should rest ‘hands-free’ in the SLURRYTUB front cut-out to allow you to wash it out with ease.

Where do I let the filtered water drain?

You should always allow filtered water from the SLURRYTUB drain into a designated wash-up area or capture the water and recycle it on the job - a great way to increase water savings on your job site.

How effective is the SLURRYTUB filtering process?

The filtered water which flows from SLURRYTUB is visibly clear. Typical laboratory testing of water samples shows Total Suspended Solids (TSS) of less than 50mg/L.

Can I use the SLURRYTUB after tiling, rendering, or plastering?

Yes! The low-micron-rated paper filter used in SLURRYTUB can be used for these types of cleanups. However, we don’t recommend it for use with paint, adhesives or waterproof membrane.

Starter KitReviews

Orange tub with package of 6 SLURRYTUB filters

All Products

Product Information

Includes: 1 x SLURRYTUB, 1 x 6-pack of filters

Heavy-duty recyclable polypropylene tub, designed to drain quickly
Made to support most wheelbarrows, handsfree
Corner cleats to hold the filter in place
Drain plugs with threaded holes, suitable for standard 20mm tap and hose fittings
Compatible with SLURRYTUB single-use, biodegradable filter papers
Dimensions: 36 x 24 x 13 in
Weight: 18 lbs

On the job, SLURRYTUB is a straightforward piece of kit. It uses a single-use biodegradable filter that is placed into the tub and secured down by attaching the 4 holes into the cleats. Slurry waste is then poured into the tub, and hand tools and equipment can be washed down with the runoff flowing into the tub. The filtered water is then drained safely in washout areas or recycled on the job. Most of the water should drain within 30-60 minutes depending on the slurry contents. When dry enough, dispose of the hardened waste, along with the biodegradable filter into the work site waste disposal bin at the end of the day. Way too easy!

Graphic with 3 slurrytub steps, placing filter in tub, emptying wheelbarrow into tub, and disposing of dirty filter

I'd recommend SLURRYTUB to basically anyone who uses water or cement. All builders should set up a little station right next to a tap [for their people to use], so it's a no-brainer.
- K.C.
"We are doing anything from grouting, paving, tiling to stonework and the SLURRYTUB works efficiently on all of those materials. I’d recommend SLURRYTUB and will continue to recommend SLURRYTUB because it’s a fantastic product.”
- Mother Natures Landscape
I'd recommend SLURRYTUB to basically anyone who uses water or cement. All builders should set up a little station right next to a tap [for their people to use], so it's a no-brainer.
- K.C.
"We are doing anything from grouting, paving, tiling to stonework and the SLURRYTUB works efficiently on all of those materials. I’d recommend SLURRYTUB and will continue to recommend SLURRYTUB because it’s a fantastic product.”
- Mother Natures Landscape
I'd recommend SLURRYTUB to basically anyone who uses water or cement. All builders should set up a little station right next to a tap [for their people to use], so it's a no-brainer.
- K.C.
"We are doing anything from grouting, paving, tiling to stonework and the SLURRYTUB works efficiently on all of those materials. I’d recommend SLURRYTUB and will continue to recommend SLURRYTUB because it’s a fantastic product.”
- Mother Natures Landscape

You've Got Questions. We've Got Answers.

If there is something you'd like to know about SLURRYTUB's innovative solution to job site waste, look no further than our FAQs.

How do I get SLURRYTUB?
How is SLURRYTUB shipped?
What types of cleanup can be done in a SLURRYTUB?
What is the water capacity of the SLURRYTUB?
How long does it take for the slurry contents to dry and how do I dispose of the hardened waste?

It typically takes 30-60 minutes for the wet slurry to dry, however, this will vary depending on the contents of the washout material.

Once the waste has hardened, simply empty the contents and the biodegradable filter into the garbage or take the contents off-site and dispose of them safely following your local municipal guidelines.
How do I attach the SLURRYTUB filter to the tub?

Carefully remove the filter from the ZIPLOCK bag and open the filter, keeping the flap with the logo at the front of the tub. Once the filter is placed into the tub, carefully attach the filter holes to the ‘cleats’ on each corner of the SLURRYTUB. Make sure the filter flap is at the front and sits over the lower cut-out area on the tub.
Can I stand up my wheelbarrow in the SLURRYTUB without holding it?
Where do I let the filtered water drain?
How effective is the SLURRYTUB filtering process?
Can I use the SLURRYTUB after tiling, rendering, or plastering?

Not Seeing the Answers You Need?

If you are not seeing the answers to your questions, contact us and provide more details about this product.

First Name

Last Name

Phone

Your Question

Spam Blocker

Job Site, Done Right

SLURRYTUB delivers a cost-effective, environmentally-friendly solution for slurry waste management. It’s the smart choice for both sustainability and savings.

Shop Online